1987 warrior wiring and fuel problems... please help, im so new to this

this is my first post and i love this site! i am having some problems with my warrior... i picked up the bike for 100 bucks like a month ago and it apparently needed a top end rebuild (really just the exhaust valve and timing chain.) so now ive got it all shiny and hooked up but i cant for the life of me remember where the fuel line from the tank goes in. is it the the valve towards the top, or the one at the bottom? there is also a line coming out of the middle section that is about 8 inches long but doesnt connect to anything it just sticks out of the carb. when i tried to bump start it today it started pouring fuel out of the carb.

ok on to the more intimidating problem. the wiring :/. ok so the guy before me really jacked it up. there were a bunch of wires that were just electrical taped together, some that were just broken and not hooked to anything, and some that just were twisted together... the three of regulator plugs are broken off and three of the wires are broken off the regulator unit but still hooked to the plug. i did replace the starter relay. im still getting no lights, no dash lights, and the starter wont turn. but i have put a lot of time into this thing and i really wanna get it running soon. if anyone has a wiring diagram for an 87 that would be great... i really appreciate it.

for the carb it is the fuel line on the side and the bottom line is a vent tube but id it is pouring out fuel your needles is stuck in the seat or your float hieght is off, take the carb apart and clean it real good. For the wiring if you are getting no lights, with a battery check the fuse it should be on the back of the quad located under the left rear fender on a frame tube.

ok i will do that. also there are two fuse looking things with rubber boots around them, which one do you thing it is? thanks

ps i have 87 harness for sell 50 + shipping

the fuse holder if stock pulls apart in the middle and reveals a glass 15a fuse see which one pulls apart

Ok I took it off and this is what it looks like. I know I'm asking the dumbest questions haha but is it ok?

its done !!

nope its burnt out and that is not a stock 15 amp fuse looks more like a 20- 30 amp which means that someone had a shorting out problem or they didnt have any other fuses on hand

it was wrapped in tin foil too lol. so i pulled the harness off the bike and im in the process of unwrapping it. so i need a 15 amp fuse?

Yep!

Bones, what kind of condition is that wire harness in???

warrior87sambo said:

ok i will do that. also there are two fuse looking things with rubber boots around them, which one do you thing it is? thanks

Click to expand...

do the 87's have the spare fuse holder like my 95.? that may be why your seeing 2 fuse looking thingys with boots

yeah they do but the other fuse is gone

warrior87sambo said:

Bones, what kind of condition is that wire harness in???

Click to expand...

i'll take a good look at it tomorrow and let you know

do you still have the 87 harness for sell... if so i will take it