Search results

So when i bought my warrior the lights were on it but not hooked up.i took my front fender off and look at the harnes but alll i see is one wire hangin and its green.my bikes an 87 warrior and if anyone can help me figure these lights out that would be great.thx

thx guys im gonna install one

Can i put a fuel filter on my gas line from the fuel cock to the carb?

So theres only 1 fuse on a warrior and it goes from the battery to the rectifier/regulator.and its a 15amp fuse.Am i right or wrong

I notice on mine the red wire is wired in with my pos on battery.would that be it.

What does the warrior fuse look like

looked its not there all thats there is 3 relays silnoid and lots of wires but no fuse.

I have a 1987 warrior and i cant find a fuse on the wiring harness for the life of me.So i would like to install one but im not sure where the fuse goes and how big of a fuse to use.can anyone help me plz.thx

thx guys

wheres the cheapest place to get a GYT-R cover

so if i keep my pull start off what do i cover the crank end with or do i just take off the slip on collar for the pull start assembly

Will any yz250 shifter fit on my 87 warrior.

ya it hicups

ok cool i want to cut it off and replace.

When my 87 warrior is idleing every now and again it misses maby once every min or so

thx man so why do people disable the parking brake

What is a brake block off plate for

Im loving this thread but i have one problem i don't see these pictures your relating to.can anyone let me know how to veiw the pics for the carb jetting on this thread plz thx.

so the pilot screw is right on the bottom of the carb.am i right.and the main jet in the bowl is snug.and the 42.5 pilot is snug.i had set the jet on the bottom of the carb at 1.5turns so that might be my problem.

I have no mods its all stock.my air filter is not too dirty.i did clean my carb it wasn't that dirty either.where abouts are the carb jets and what is the jet factory settings?The bike starts great idles great.sry it took me so long to reply