Search results

Well got my new jets in, run down had a 136 main, 42.5 pilot, I took carb apart when put back it will stall or fall on its face if you blip the throttle or punch to WOT. I put in a 45 pilot and a 150 no change, but If I cover the intake but leave about a 1/4-3/8 gap between my fingers it revs...

well fired mine up just now with new jets in still does it just like yours blip the throttle falls on its face or stalls out, back to the drawing bored any luck on yours.

jets r us has the carb bowl screws I just got a set they are nice stainless steel allen screws alot easier to put in and am sure will be easier to remove them later.

Well once I get mine fired up with this rejet, if its like yours we will be in the same boat then.

Did it start this after that intake you made was put on? Wonder if it has anything to do with it, too short, flow or wrong or something like that. I know its a pain but what about putting the factory intake back on just to rule that? If its flowing alot better then the stock intake maybe need to...

Mine did this very thing after I took my perfectly work carb apart to check if it was dirty, what started that was air filter wasn't in right and had dust everywhere. Mine would do this same thing rev slow its fine but blip it, or try to blip to WOT to do a jackrabbit take off, would fall or...

Yes it does, I watch the ama super cross when it rained and they said it hard on the clutches because hydro you can't feel or tell when its slipping or by lever feel on adjustment when its bad and will burn a clutch out.

If you can get a pair of vise grips on those screws it will help, or cut a slot and use a flat blade screw driver. Yea I have to agree some people should touch a tool or even work any thing.

WOOHOO got my jets in today fro, jets r us great shipping pretty fast too, now if this dang rain storm would stop and get out of here.

Got my jets ordered from jets r us last week should be here monday at soonest am excited maybe will finally get it back going then comes getting a chain and sprocket set. Got to get some little stuff done too but am busy with stuff around the house as well, that time of year nice spring weather...

Ok I am looking on those sites, I like the jets pretty cheap the kit is a good deal but don't that many but then again just in case the stainless screws are nice. Now on motosport, looking at the chain and sprocket sets, there is a good deal but on chain IIRC its a 520 120 link for the...

ok cool thanks for fast reply.

I am still around with stuff that came up through winter I still haven't worked on mine, I did at one time had a website that I could order single jets and a chain sprocket set but don't remember what it was. I need 3 jets, 145, 150, 152.5, and a chain and sprocket set, would like to order at...

Sony don't seem to do good with car audio, though I have had good luck with jvc, had a head unit last over 10 years before the speaker outputs quit, so bought another jvc head unit. Heard alpine had the best the subs, but they cost alot.

lol yea thats a good deal, I had a sony explod 10 sub I bought new with in a day I had it burnt and blown to a crisp once I saw it was only 300 watts rms but had my amp bridged pushing about 600 so I learned my lesson the hard way.

EEWW bet before long you will have those subs blown, thats a low rms look at the amp see what its rms output is and don't let it go over what the subs are rated at on RMS. I always try to get subs rated at least 300 watts rms just to be safe. I have a set now power acoustik's fubar 12's rated...

What brand of subs did you get?

Have you thought about seeing what it would cost to take the exhaust in and have it tig welded? Its cleaner weld and can control the heat better.

Is the pipe in the rear up high enough to clear the axle in suspension travel? If you plan to get that rough with it. I can't either to see and hear it run!

Been raining all freaking weekend, well since about 3 on Saturday and hasn't really let up did a little last night but started again today rained all day. But its a much much needed relief been one of those long slow rains, maybe will get a good soak and fill up all the ponds and lakes around.