Search results

I could not get the link to work either???

The problem I have is that the electrical components changed in 2002 The manual on here is for an earlier year. I have no idea if the values have changed. Does anyone have a shop manual for a 2002 or newer that has these values? I agree something has to be bad electrical I just don't think I...

I think the timing makes sense. I thought I would check to see the key in the flywheel was sheared causing the fly wheel to move and be out of time. I replaced the timing chain and the piston rings a week ago. I had the bike running at one point it took for hell and ever to get it to start...

The bike does flood after excessive cranking on the starter. I have checked the timing and the woodrift key in the flywheel. I will check it again when I get home but I am fairly sure the timing is right. I agree that is exactly what it sounds like to me. But when it was checked it was dead on

First off guys, I'm new to the forum. I'm having problems with a 2004 warrior. I'm getting gas, air, compression, and spark, but the bike still will not start. I have replaced the rings, timing chain, and I have checked the woodrift key to the flywheel to make sure it is not sheared or worn. The...

Thanks Guys, I appreciate the input I plan on checking for air leaks and putting RTV sealant on the intake boots both aluminum and the rubber one. I think I might need the 16E needle that should run one size leaner. I am running stock motor with a slip-on muffler. I know with the edelbrock...

Stock Warrior 2004 model, Minkuni carb developed idle issue. Will not maintain constant idle speed. Idle will become erratically high and then drop so low it will stall. I replaced Minkuni with an Edelbrock Quicksilver. Still has idle issues, all over the place! Has new rings, new piston, valves...

Stock Warrior 2004 model, Minkuni carb developed idle issue. Will not maintain constant idle speed. Idle will become erratically high and then drop so low it will stall. I replaced Minkuni with an Edelbrock Quicksilver. Still has idle issues, all over the place! Has new rings, new piston, valves...

Ok sorry guys for the late reply. The smokes color is white. The head bolts are tight and to proper torque specs. The head pipe is stock with a FMF slip on. I do have the washer/gasket on the head pipe. The head however I did not check to see if it is flat, the o ring seals for the valve...

Ok this is a tough question I have a 04 warrior with smoke coming from what apears to be the front side of the head. Ok the first thing I thought was oil ring seal for rocker covers, or head gasket leak. I went ahead and tore the engine down replaced ringsand piston, base and head gasket and...