2000 warrior rear end

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lstein375

New Member
Joined
Oct 9, 2011
Messages
1
Reaction score
0
Can't get my rear axle apart. Help my buddy with his a couple years ago and dont remember any little gremlins....will not come apart. Have the wheels, rear cog, etc. Off. Will not pull apart...any suggestions or does anyone have a manual or know a place to download....is driving me nuts! Thanks in advancs...
 
Put the nut for the left side hub back on upside down run it down till its flush with the end of the axel and get a 2x4 and a sledge hammer set the board up against the end of the axel and whale on it with the sledge hammer and it should come out the otherside eventually
 
X2 on that...You can get a deep spocket that goes over the thread and hit that.
 
its the axle bearing spacer siezed onto the axle shaft beat it or press it off
 
Back
Top