Fuse problem...please help

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

teamexileracing

Well-Known Member
Joined
Dec 5, 2006
Messages
2,622
Reaction score
0
Location
Right behind you!
K im finaly finishing my warrior. And i found that there is something wrong with my fuse. When it works it gets really really hot and it doesnt work all the time. Like if i mess with the wires leading to the fuse it will eather work and eveything will come on or it will do nothing and not work. I pulled it apart and it has a ACC20 fuse in it. Idk if that helps but i dont know if its the wrong fuse or what. Please help.
 
What if i have too much power going into the bike would that make the fuse hot? Becuase i just hooked the charger up the pos. and neg. wires so i could test everything becuase my battery was dead and it was taking to long to charg it. WOuld that cause the fuse to get hot?

I already know there something wrong with the whole fuse set up. one of the wires are not making a good conection so im getting a new one.
 
I had an extra wiring harness in my barn so i threw that fuse on it. And it worked fine. And the battery charger is what caused it to over heat becuase it wasnt doing it when i put the actual battery on today.

All left to do is fill it with oil tomarrow and start it up. Im sooo excited.
 
Back
Top