Kodiak 400 Cylinder and piston.

[diggerzmound]

I got this cylinder from a kodiak that the clutch blew up and scattered through the engine. It has a wiseco piston so I assume it was rebuilt, the part number on the piston is 4676M08350. The piston has many vertical scratches, probably from the pieces in the oil. The cylinder has some light vertical gouging as well, I ran a hone through it quick. I had read where someone had put one on a warrior and I was always going to try it, I sold my warrior years ago and this thing is just setting here. I am not going to guarantee this to have good compression or not burn oil as it does show some damage. I was going to run it anyway just to see how it ran. The piston part number show 83.5, so it may be an overbore. Regardless I think it could be bored again.

I am asking $25 for the cylinder and piston and it should fit in the $15 flat rate medium box for shipping.

 

[Mathius]

Is that a liquid, or air cooled setup?
What year did it come off of??

 

[Mathius]

Oh never mind..
My computer wouldn't let me enlarge the picture, I see that it's an air cooled one now.

 

[bones]

if was a liquid i'd be all over it

 

[DeadLastRacing]

Is this the diggerzmound from bluetraxx?

 

[lbjamm]

That's what I was wondering

 

[beastlywarrior228]

Is this the diggerzmound from bluetraxx?

Yes

 

[diggerzmound]

Is this the diggerzmound from bluetraxx?

It's me!

How have you guys been?

Its been a long time sitting around, I think it came off a 96'. Sorry it took so ling to respond I've been out of town.

 

[357warrior]

if its the same bore size what would b the use of using this cylinder on a warrior motor just wandering

 

[bones]

its a taller jug

 

[diggerzmound]

its a taller jug

I'll be damned, that is how they got the cc's out of it. I suppose you would have to use the Kodiak rod to make it work. Not really worth the hassle. I'm glad I never got around to trying it on my warrior.

I wonder if it would work with a stroker crank and stock pin location piston..

 

[bones]

yeah the kodiak has a longer stroke by 7mm... it not useless tho if you look up fst 500cc warrior it uses that jug and ppl that wanna run a stroker crank with another piston can use it and mill it down to 0 deck height