alex456123
Well-Known Member
so i see there are no write-ups on this mod so i thought i would make one myself. all you need is a pen spring, a valve cap, and some tools. sorry bout the blurry pics. lol
pen spring mod:
Step one: remove your carb from your warrior.
step two: remove carb bowl and look for the hole where the spring goes, and remove it.
difference in the springs, bottom is the pen top is stock:
step three: put a pen spring into the original spring hole.
step four: put the bowl back onto the carb.
DONE!
valve cap mod:
just remove the plastic side cover and find the accelerator pump rod on the bottom right of the carb.
then put a valve cap onto it:
and thats how it is done! it will increase your response time tremendously!
:nanner:
credit goes to akaguppy for the spring differnce pic and the last pic
pen spring mod:
Step one: remove your carb from your warrior.
step two: remove carb bowl and look for the hole where the spring goes, and remove it.
difference in the springs, bottom is the pen top is stock:
step three: put a pen spring into the original spring hole.
step four: put the bowl back onto the carb.
DONE!
valve cap mod:
just remove the plastic side cover and find the accelerator pump rod on the bottom right of the carb.
then put a valve cap onto it:
and thats how it is done! it will increase your response time tremendously!
:nanner:
credit goes to akaguppy for the spring differnce pic and the last pic
Last edited:
