Search results

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    CDI questions

    Well I think I got it figured out. Im not seeing a woodruff key in the key way. I set it to TDC checking through the spark plug hole and the cam was dead on while the fly wheel is about an inch or so forward. So I've now got a flywheel puller and new key on its way so hopefully that'll be the...
  2. K

    CDI questions

    Nevermind that. I have a 2003 harness on a 01 warrior. Now from what I understand is the flywheels on these two are actually the same so this shouldn't be a problem. What do you guys think. Im stumped now. The coils all check within spec and I even tried swapping the stator that came with the...
  3. K

    CDI questions

    Well i got it to start finally. The stator wire colors were wrong. Reversing them did get the multi spark issue. The next issue is ignition timing. It is way advanced. It backfires a lot while trying to start it and refuses to rev. I've read up on it some more and from what I understand is the...
  4. K

    CDI questions

    So I got the harness in. I wired it up and installed a chain and starter. Hit the button and it's got a bright blue spark. Put the plug back in and it'll pop off but won't actually run. Pulled the plug again and noticed something odd. I realised it's firing way too many times. Like 6 or 7 times...
  5. K

    CDI questions

    Well I got lucky. The same day I got paid an eBay seller posted an entire harness with every electrical component but lights and a starter for 180 so I decided to order it. Its more than what I paid for the whole bike but I think it'll be worth it. By building the harness I was just going to...
  6. K

    CDI questions

    Also thanks in advance. Please don't tell me to just go and buy a bunch of all new oe parts and do it all right the way it was designed. That cost money and with as much as it will cost plus everything else it needs I would have bought a nice running bike. I'm going to build a harness that...
  7. K

    CDI questions

    Hey guys I'm new to the forums here. I just picked up a 2001 Warrior for stupid cheap but it needs quite a bit of work. My main problem I'm working with right now is ignition. Now, I'm no professional on CDI ignition but I've got a pretty solid understanding of it. On this particular quad the...
Back
Top