Search results

Nevermind, I got it. Jason

Thanks

OK? So nobody has had an issue like this before?

Anybody?

On mine there are two sets of wires on the left handle bar. 1 is a 4 wire going to the run switch, and a 2 wire for the parking brake. If you trace those wires under the "hood" you will see their connectors, they should just unplug and the be able to plug back into each other.

How dirty is it, and how far do you want to go w/ disassembly? You could open it up and use some carb cleaner, then use some pipe cleaners, and then more carb cleaner or compressed air to blow out everything. If it is really bad I completely dissemble them and dip them in a gallon can of...

What is the Ohm reading on your ignition coil? Plug is good? no cracks etc - do you have new one to try? All connections clean and tight? Is your parking brake on (have you tried bypassing the reverse cut out switch?

Just put in a new clutch (fiber and steel. new springs) from Barnett. Clutch will not disengage. This was the reason (along w/ slippage) for changing. I have adjusted the cable at both ends with no effect. Did not put in the extra steel, just the new stuff. Part of my question is in regards...

Got it running. ;D Problem was that the Woodruff Key had sheared, and the flywheel was actually 180* out (so what showed as TDC was actually BDC) Fixed that, then the end of the cam busted, totaled the head. Bent both valves, screwed the gear up and busted a piece of the head by the...

I had checked flow before, and I have just rechecked it after I read your post. I do have flow both before the carb, and from the drain at the bottom. It will flow from both on and reserve, off will stop it. Just for grins I hooked up a timing light to the plug, and the flashing is very...

Hey guys, been lurking for about a month, first post. I bought a 2000 Warrior from a guy I do some side work for as a project for me and my daughter. Not having much luck, first 4 wheeler I've ever had or worked on. When I got the quad the motor was open and missing the bearing under the...