Search results

I'm in for one maybe 2 two of these!

Well, I unplugged the wire for the parking brake and it has seemed to fix my issue. Quad starts up with out the clutch, and doesn't break up when I hit the throttle. Neutral light still doesn't work though. I won't be able to ride it until next weekend, instead I'll be racing the 69 Camaro this...

hmmm I'm almost positive it wouldn't turn over with the plug to the parking brake switch unplugged from the harness. I'll take another peek at it tomorrow (almost midnight). The other strange thing is that by by-passing the clutch switch, I still had to hold in the clutch for it to turn over. I...

She runs!!!! I cut and soldered the wires for the parking brake switch together and deleted the clutch switch. The issue now is when I hit the throttle it breaks up and dies; idles fine though. From what I've read this is caused by the parking brake switch. I put a block off on the rear brake...

I'm still trying to find a reverse switch for this sucker. I really don't think this is my issue since the wire runs from the switch to the light bulb. Prior to replacing the wiring harness the reverse light did work when the quad was in reverse. Does anyone have any idea what the issue might be...

I had a buddy stop by and help me out doing some more testing. We determined the reverse switch is bad per the test in the book; no continuity with the lever pushed forward and the lead to the switch. Would this cause the motor to not turn over? I don't see how if the green wire runs to the...

Well I picked up a Clymer service manual for the machine, but before I had a chance to get into the wiring the starter clutch went bad. My buddy was parting out his 01 warrior after his chain came off and cracked his motor. I took his main wire harness and neutral switch and wire for it since...

I have start/stop/light switch off of a 2001 warrior. Pm Sent

The neutral light never comes on either with the wire plugged in or not. I think the switch is fried and the previous owner by-passed it, and the parking brake. For some reason the kill switch has the black w/ white stripe connected to the sold black wire. I finally received my repair...

I haven't had a chance to take a look at the wiring until today; finally getting over a cold. I have a question, I think the green plug on the wiring harness goes to the neutral relay. So that would mean that the other plug that is by-passed with speaker wire is the start circuit cut-off relay...

You sir are a savior! Thanks for coming through with the wiring diagram. Good news, I replaced my main jet and adjusted my fuel/air screw 2 1/4 turns. The quad is purring like a kitten now. It's still back firing on high revs so I still have a little tuning to do. I can't thank you guys enough...

My jets came in today! Hopefully, I can work on it tomorrow after work. I'm still waiting for the repair manual to come in. The wiring issue is driving me nuts! I think they bypassed the neutral switch at the relay plug instead of at the clutch. There is a baby blue wire that goes to the end of...

Have you drained the oil? Were there any metal shavings? I had a similar issue and it ended up being my stator. The starter would spin and the gears inside would spin but the motor wouldn't turn over. Who ever put it in before I bought the quad put the stator in with the wires loose. When I...

I'm located in MA and I do ride year around. I'll take your advice on running just the main first and see how that does. I was messing around with the quad last night and I thought I was getting too much fuel because the motor will back fire if I rev it high or in between shifts. Per yamahauler...

Thanks for the info yamahauler. I did some research and read that the HFM pipe comes with a jet kit and that most were using a 148/150 main jet. I just ordered a 147.5, 150 main jet, and a 45 pilot jet. I'm hoping that after I up the main and the pilot that it fixes the rev issue I'm having...

I have checked the boot by visual inspection when I took the carb off to clean it. I want to try and spray the boot with starting fluid to see if the quad revs any higher. I've replaced the plug and it looks good a little on the grey side. This is after letting the quad warm up for 5 minutes and...

Mid day bump.... any help out there?

Sorry that it took me a few days to get a video up work has been crazy! Here is the link to the video. When I put the choke on it sounds like it got better. Does this mean I'm not getting enough fuel? I still can't figure out the wiring on this thing. I ordered the repair manual so hopefully...

Hi everyone! My name is Anthony and I just bought my first Warrior 350 it's a 2001. Only mod is a HFM slip on, carb has not been rejetted for exhaust. When I bought it, it was not running. The motor would crank over but no spark. After replacing the stator and ignition coil, she fired right up...