Search results

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Oil cooler

    I know you can take a Big Bear oil filter cover off and use it to mod the Warrior for a oil cooler, but will a Wolverine cover work?
  2. H

    Warrior won't get up and go

    Yes there is a little spring that is suppose to push it back up. If you have an after market pipe, you will have to change the main jet too but it sounds like you fixed the original problem. If the pin didn't move, niether were you...... Main jet is real easy to replace, you just have to go a...
  3. H

    Warrior dying out with quick jab of the throttle

    Did you clean the throttle pump? When you take the carb off, follow where the throttle cable goes into the side of the carb (behind a little plastic cover). There you will see a little black rubber boot with a metal pin in it. Push it down and see if there is any play in it, I promise that is...
  4. H

    Warrior won't get up and go

    That's it , make sure it moves freely, and put a fuel filter in line to keep the trash out.
  5. H

    Warrior dying out with quick jab of the throttle

    If it does it when you jam it, and it boggs out in 1st and 2nd, then clean the accelerator pump. It's in the carb, but it's the needle on the side and it has a little rubber boot that will cause the pump needle to stick. 90% on this brotha
  6. H

    Warrior won't get up and go

    I had that problem, and after replacing the main jet and cleaning the carb, I found it to be the accelerator pump. It's in the carb, but it's a little needle that has a rubber boot that acts like a spring for it. What I found was it was sticking. Clean that real good, and you should be set.
  7. H

    Oil cooler?

    Great information, thank you.
  8. H

    sputering

    Niether do cheap women! Sorry, couldn't resist ;D
  9. H

    warrior 350 gear/shifting problem

    Adjust you reverse lever. If it isn't clicked in, your quad will not go into gear, and you will hear a clicking noise when you shift to 1st.
  10. H

    Oil cooler?

    I want to see what is the best oil cooler setup to buy, please let me know your experience. Several different types to buy, please help.
  11. H

    Won't shift

    I have a problem with , while riding, the gears won't shift. It's like the shifter is stuck and then the bike bogs out. I have to reach down and jerk on the shifter to get it to re-engage and then it's fine for a little while. The clutch works, but I did notice the nuetral light doesn't always...
  12. H

    Dropping out

    I made a big mistake, I let my Brother-in-law ride my quad! Anyway, it came back with a new problem. When riding, or sitting, if you try and accelerate it starts to drop out like it's going to die. When I jumped on it, to see what he had done, it did it and it acted like it didn't want to change...
Back
Top