19/10-9 with 14 teeth sprocket

[Venom]

hi! I was offered pretty cheap two 19/10-9 maxxis here is the link:
http://abrunheira-lisboa.olx.pt/pneus-moto4-iid-432976853
Will they work with a 14 teeth sprocket?
I bought the bike 2 or 3 months ago and it came with 22" and a 15 teeth sprocket . And i want more acceleration, but i dont want to ride in 6"gear full trigger at 60km/h.
Some help?

thanks

 

[YAMAHAULER]

it will actually have a bit more acceleration but you'll be in 6th before you know it
you just won't have much for top speed unless you keep the 15 tooth in with the 19's

 

[Venom]

Thanks for th reply.
So in your opinion i should keep the 15 tooth.
Will it be close to stock ratio?15/40 19"wheels?

 

[beastlywarrior228]

15-38 will probably be close to stock 15-40 will be slightly taller

 

[Venom]

I have a a stock motor, but with a dynojet uni filter and pipe(mods to do in decembre), will i regain some low end torque and accel?

 

[alex456123]

ya you will have tons more torque if you dont change the gearing!

 

[1statv]

15-38 will probably be close to stock 15-40 will be slightly taller

Didn't you say 13-38 is best with stock tires for acceleration and top end?

 

[Gen1Pat]

15/38 is taller than 15/40. You INCREASE the number of teeth on the front sprocket to raise the gearing. You DECREASE the number of teeth on the rear sprocket to raise the gearing.

And, if it doesn't speak for itself, you DECREASE the number of teeth on the front sprocket to lower the gearing. You INCREASE the number of teeth on the rear sprocket to lower the gearing.

 

[beastlywarrior228]

Sorry i ment 14-38

 

[Gen1Pat]

Yeah 14/38 with that short a tire would be fairly close to stock overall gearing. I'm going to run 14/37 with 21x11-9 on the stroker. May take it up to a 15, but, we'll see.