1st gen works AT STEELERS!

[Gen1Pat]

Selling my works... Bought them in June, installed them near the end of June, have MAYBE 5 hours on them. They work AWESOME! Improved the ride tremdously. They will come in the original box, with tuning instructions, preload wrench, and a set of grey nylon shock covers that I had. Absolutely NO damage, other than some small holes in the covers. They are set up for 160-200lb MX, or 210-250lb recreation use. I"m 6' 180lbs and they feel great to me, for my riding style. These were also built the 2nd week of June, they ARE NOT LEFT OVERS! Paid $425 for them, asking $390, that's shipped! Selling because I need the money, and you all will see what it is I need it for in the next few weeks.

 

[YAMAHAULER]

Got a feeling I know:nanner:

 

[johnsmith133]

would they fit an 01? with +3's?

 

[1999yamahawarrior]

Hmmm, wonder what it is

 

[Gen1Pat]

Fit, probably. But the front end would be low as hell. 1st gen shocks are 1/4" shorter than 2nd gen.

 

[johnsmith133]

damn thats what i dont want =/

 

[mrjim0214]

hey genpat, what do they measure eye to eye???

 

[Gen1Pat]

They are 14".

 

[duneracerweston]

Still should work fine on the newer models, and on +2 arms because the lower arm is longer then the newer models

 

[Gen1Pat]

Is there anything you don't know about atv suspension Weston? Lol. I know there is very little difference in shock length on between the gens, probably wouldn't even notice a difference on a newer warrior.

 

[Gen1Pat]

As of right now the sale of my shocks are on hold. Looks like what I was wanting to do MAY fall through. Atleast for the time being. If that's the case (I think it will be) I'll have to keep these. Sorry for those that had interest. However, if what I want to do ends up working in my favore, they will be up forsale again.

 

[duneracerweston]

Is there anything you don't know about atv suspension Weston? Lol.

Yes actually lol i dont completely understand the internals of shocks , or what the sweet spot for caster settings is lol

 

[Gen1Pat]

Ya don't need to know how the shocks work. That's what shock mfgs are for! lol. Unless you want to get into building and valving your own units.

 

[bones]

or what the sweet spot for caster settings is lol

7* caster

 

[duneracerweston]

7* caster

good to know, now i can finish guessing on walle and get it right!!

 

[88WarriorBoy]

Yeah walle has to be the most race ready warrior in the
WORLD

 

[duneracerweston]

Yeah walle has to be the most race ready warrior in the
WORLD.. When the motor stays together..

fixed lol thank you, i take that as a compliment. it was actual built to run MX

 

[88WarriorBoy]

Thats sick lol Good Job though man