350 Warrior Wont Start

[Meek_Daddy]

Ok so my bike wont turn over with my start button. i put a screwdriver on the selenoid and it turns over that way. all my wires look good. whats the deal? Nothing happens when i press the button. my neutral light is on but it wont turn over. i dont have the tank hooked up but that shouldnt make it not turn over. my contacts in my switch look fine. what could it be?

 

[Gen1Pat]

You need a solenoid. Just make sure you are getting power to the solenoid from the switch before you go replacing it. Also, make sure the fuse next to the solenoid is good.

 

[Resurrected]

I had same problem, check all wire connections. I had a bad relay. Swap your two and see if it starts w the button