A-arms correct?

[mrjim0214]

A-arms correct? EDIT

ok so i installed the A-arms then i noticed the offset on the lower arm for the shock mount. tell me if i have the offset correct with the location of the upper a-arm brake line holder. and sitting on the machine this 1 would be on left side correct? its stamped "L" on the the knuckle.....i got pics, i just tired and wanted to double check......thanks

EDIT-:argh:-----just found this pic, i took when i took them off, im thinkin i got wrong lower a-arm on it, kinda hard to see, what ya'll think, looks like i got opposite offset on threre now, if someone could verify that would be great (they do look better aye)

 

[mrjim0214]

OK im 99.854% sure i got it correct now, by studing welds

this is with lower a-arms switched from previous post. im looking at welds on shock mount, only thing i could see to go by. im running on next to no sleep thou, but i think its kinda obvious the welds/mount are shorter on these than other post.:sleep:

 

[beastlywarrior228]

Looks like a right side arm to me but its not that big of a deal

 

[mrjim0214]

left side sitting on quad, puts brake line clip toward back

 

[DeadLastRacing]

the lower mount is off center my such a small amount, but if I remember.....stock arms the bigger side is the front(?) So yes, how you have them mocked up not is wrong.

 

[mrjim0214]

yea, my 1st post was wrong, 2nd post correct, thanks dead, or at least thats the way they came off from old pic, the way i got them set up now on 2nd post and i highly doubt they were ever off before me, knowing the owner before