banshee shock adjustment

[bickel76]

well, the shock just showed up and i'm in the middle of installing it. i noticed the soft/hard knob on the side of the piggyback. are the other adjustments similar to the way you adjust the warrior shock? any advice would be greatly appreciated. if no one has any info, it's no biggie. i'll just mess with it until i figure it out. cant be that difficult.

 

[dswwarrior350]

The bottom knob is for the rebound(pre load), the knob on the side is for compression... thats all i know haha

 

[bickel76]

DS, here is what the guy that i bought the shock had to say about the settings. i thought i would pass it along.........

SORRY FOR THE DELY..........took kids to carnival.... The rebound is the star wheel at the base of the shock. turn wheel clockwise till it stops then back it out 12 clicks for standard setting there will be two marks(arrows) that will line up when standard is set . yOU CAN GO +/- ABOUT 6 CLICKS FROM THERE FOR PERSONAL PREFERENCE. clockwise will increase the damping. never more than 20 clicks out from fully in. I got info from the banshee bible... If you don't have a service manual It will be one of your better investments to maintaining your quad. They are very informative and even tell you which bolts to remove first when maintaining the shock to ease its removal... Hope that helps and e-mail me if you need more info..................Paul

i havent tried to tweak mine yet. i'll do that once i'm able to hit the trails. the only thing i have messed with is the knob on the side of the piggyback. let me know if any of that info helps.