Banshee Shocks Fit A Warrior ?

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

waryos

New Member
Joined
Dec 24, 2005
Messages
4
Reaction score
0
Has anyone done this ? Are they the same length ? Is the rideability changed much . Is this a smart upgrade ?
 
front shocks off a banshee will fit. But...... they will make the front of your warrior higher then the back. The rear shock off a banshee will also fit but hits the airbox.... so not a good idea unless you do somthing about you airbox.
 
there's really no advantage of banshee shocks over warrior shocks. they both use the same stone-aged technology. You need to go aftermarket to get better shocks for the warrior
 
I think the warrior stock front shocks are fine. Unless you plane on jumping it 10 to 20 feet in the air. I have the rappy rear shock and stock 03 warrior shock in the front. awesome set up!
 
How much does the raptor shock run? Do you have to make any mods or does it just bolt right up?
 
i got mine for $65 off ebay. Yes just bolt it right on. But you have to figure out a new spot of the reservoir thingy.
 
u also probly will have to cut off your lower chain roller to use the rappy shock...thats what i had to do

what?...the chain roller is on the outside of your swing arm and the shock sits in the middle
 
You don't want to use a banshee shock regardless, they have less travel than the warrior I think.
 
Back
Top