Bent front end????

[1statv]

Look at steering stem clamp

Look at front end from bumper up

 

[90_warrior]

rom the pictures it does look bent, more like the top of the frame

 

[1statv]

Anyone else opinion

 

[mrjim0214]

what u hit?

 

[lbjamm]

Looks like it rolled. IDK

 

[1statv]

I didn't hit anything . When I bought it back in August 2012 it was my 1st quad didn't know much about them . Went riding and started to notice the rear looked off found out sub frame was bent started to pay attention to front end and noticing the same thing . Sucks for me hoping to get a new frame soon.

 

[lbjamm]

I bet it was rolled.

 

[1statv]

Any advice when swapping frames??? Possibly getting one this saturday

 

[alex456123]

yep! swap out worn bearings and a-arm bushings with some new ones while you are in there if they are not tight. clean out all old grease and put in new stuff.

 

[1statv]

View attachment 1221

Almost done all bolts are loose and ready.

Top motor mounts F me
View attachment 1222

View attachment 1223

 

[Gen1Pat]

Paint the frame while you are at it. You'll be glad you did.

 

[1statv]

Paint the frame while you are at it. You'll be glad you did.

I am just trying to decide on color maybe dark grey with silver flakes idk yet . What can I coat frame and wire harness with that well make cleaning easier after riding??

 

[alex456123]

Epoxy coat?

 

[alex456123]

And rewrap the harness?

 

[1statv]

And rewrap the harness?

Re wrap with what the electrical tape looks horrible when it get mud on it . Super duct tape??

 

[alex456123]

1 inch wide gorilla tape.

 

[geeessfore]

Spray and wipe with spray silicone. I rewrap all mine with OE Chrysler cloth type tape but you could also just buy new wire loom. Just my choice products to use.

 

[lbjamm]

Corrugated plastic loom would be cool.

 

[1statv]

Corrugated plastic loom would be cool.

Got me 6 ft thanks for the info

 

[1statv]

Spray and wipe with spray silicone. I rewrap all mine with OE Chrysler cloth type tape but you could also just buy new wire loom. Just my choice products to use.

I can't find this silicone spray you talk about.