Big Bear oil cooler mod

[bkroll84]

I am a new member just thought I would share this I will be doing this mod on my warrior aka Big Boy. I just bought all parts needed and will do a step by step video for all thinking of doing this mod some like clutch cover mod I prefer this way and i will be fabbing up a new shifter for those who are wooried about clearance i will show how to do shifter 2 ways for those who have access to a welder and those who dont recomend welded one.

Thanks message me if have any questions


https://sphotos-a.xx.fbcdn.net/hphotos-snc6/249940_453259124733691_250118078_n.jpg

 

[bkroll84]

I also do custom plastics making a new front piece for front that will have a scoop design and a molded light pocket similar to the 400ex

You can check out my site at tzcustoms.com to see some car products i make

https://www.facebook.com/photo.php?v=453327588060178

Short video of oil cooler lines

 

[Gen1Pat]

I'm interested to see this front fender. There is a write up in here somewhere on the big bear cooler, and a shifter for it.

 

[bones]

the best way i found for the shifter is to use the bigbear 350 shift shaft as it comes about 2 1/2 inches farther out to clear the adapter, you just cut the clutch side to the right length and then you can use the yz250

 

[DeadLastRacing]

I also do custom plastics making a new front piece for front that will have a scoop design and a molded light pocket similar to the 400ex

You can check out my site at tzcustoms.com to see some car products i make

Humm....I'm really interested in seeing this hood. Do you vacuum form?

 

[bkroll84]

Yep I do vacuum forming going to make it out of 90 gauge abs plastics and going to make skid plates with metal inserts for around 80 bucks

 

[bkroll84]

they will hold up really strong will have flex to them so they wont break easy

 

[DeadLastRacing]

Sweet. I've always wanted to see a stockish hood with a scoop as all one piece. A vacuum form is the way to do it!

thick plastic skids slide over the rocks better too.

 

[Gen1Pat]

I really wanna see that hood.

 

[lbjamm]

Me too. Might want to buy one.