Big Bear oil cooler

[ACA332]

I need the complete setup that bolts to the side of the engine. There was one for sale a while ago that I tried to buy, but the owner stopped responding and hasn't been back to the site.

Don't need lines, or the radiator. Just the parts that bolt to the side of the engine. Not interested in a modded case cover.

Thanks guys!

 

[YAMAHAULER]

check Ebay I seen 1 on there for $20 for a 96 wolverine 350

 

[N3VER]

I heard that the big bear oil cooler isnt as effective as the Clutch cover mod. Read somewhere that really you need the cool oil to be hitting the crank bearing first. Is there any truth to this? Anyone used both. Because i was thinking of doing the same thing.

 

[1998yamahawarrior]

Well there have been more crank nearing failures than anything else bearing wise off the top of my head.

 

[ACA332]

I thought only the 95 big bear oil coolers fit? Looking online, the part numbers seem to match up but I can't be sure.

My thinking is, Yamaha designed the Warrior to be air cooled, and designed the big bear to be oil cooled. If I stick an oil cooler on a warrior, I'm just that much further ahead. I'm not a big fan of interrupting the oil flow to the crank.

 

[N3VER]

I thought only the 95 big bear oil coolers fit? Looking online, the part numbers seem to match up but I can't be sure.

My thinking is, Yamaha designed the Warrior to be air cooled, and designed the big bear to be oil cooled. If I stick an oil cooler on a warrior, I'm just that much further ahead. I'm not a big fan of interrupting the oil flow to the crank.

SOME cooling is better than no cooling i suppose