bike stalls out if clutch isnt engaged a little bt

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hauser2169

Well-Known Member
Joined
Sep 30, 2006
Messages
108
Reaction score
0
Location
cincinnaiti Ohio
hey guys need help.. i was riding my quad around the yard and then it wanted to die. so i pulled in the clutch and it started running again . so i wnt for about 3 mins and it did it again. so i figured if i held the clutch in a hair it would be fine. what the hell is going on. i need some help and quick
 
Is it the stock clutch perch with the parking brake crap on it?
 
Remove the parking brake and all of its sensors... unplug the white one and wrap the end in electricle tape and the greensih ones plus into eachother under the hood.

It does nothing.
 
Check the neutral sensors, I dont know if it is the same on a 350, but if they are loose they screw up everything...
 
Back
Top