Cam question

[Gookdog69]

Quick question in the manual says .06-.10
On the intake and .16-.20 on exhaust if its running a stock cam can you go as low as .06 on exhaust and .06 on intake and run fine I know stage one hot cam can be run at .04 on both is the hot cam the only cams to go that low?

 

[Gen1Pat]

I think you are giving out the metric value, not the sae value. I run my hotcam at .004"

Look up the SAE valve lash specs. .006" should be fine for both, though.

 

[lbjamm]

Hotcams recommends .005 intake and.006 exhaust. Prolly won't hurt to be a little tighter. Those are SAE

 

[Gookdog69]

Yes you are correct with the gap I left out a 0. Can stock cam run that tight with no problems? That what I was wondering?