Carb ? please help.

[Guest]

It says on the instructions from my GYTR jet kit that I need to turn the pilot screw 3 turns. Do they mean the pilot jet which is under the carb or the pilot air jet on top. I have the manual and it doesnt list a "pilot screw". It seems that if I turn the pilot jet 3 turns its so loose it will fall out. I think it was seated but screwed up and didnt check the stock setting when I screwed it out. Thanks

 

[jasonp]

There is a pilot jet, fuel screw/pilot screw, and air jet. Air jet is at the back of the carb in the mouth of the carb. If you take your intake boot off you will see it.
The pilot/fuel screw is just in front of the float bowl under the carb. The pilot jet is in the float bowl. All jets should be tight except the fuel/pilot screw. Lightly seat it and back it out 3 turns.