Carb Upgrade Question

[bikewarrior350]

So I have a mikuni flat slide carb that came off an early suzuki 250r and im curious if it would be worth swaping this onto my 366cc warrior. Fairly sure its a TM34 so it has a 34mm bore. not sure what the warrior carb is since i havent pulled it off to measure it yet. I already have the carb so its not like id loose much by trying it but still would like to get some opinions on weather its worth trying.

 

[1999yamahawarrior]

I've never measured the carb, but it says it's a 36mm.

 

[Mathius]

I've never measured the carb, but it says it's a 36mm.

Yah their 36mm stock. My neighbor has a 38mm keihin PE on his 366, and it runs great.
I had 2 lt250's when I was a kid, an 89' and a 91'. They both had 36mm keihins on them. Dunno why it would have a tm34, there better than the stock 32mm on the old 86's I guess.. lol
Those tm34's are the stock carbs for banshees I believe?

I think you could get away with running the 34mm, but you would loose a lot of bottom end.
IMO you would be better off trying to sell that one, and get a bigger carb.

 

[88WarriorBoy]

No a bashee came stock with twin 26mm mikuni round slide carbs the same carb that is on the blaster

 

[Mathius]

No a bashee came stock with twin 26mm mikuni round slide carbs the same carb that is on the blaster

Duh! I knew that. lol


:stupid:

 

[88WarriorBoy]

lol

 

[bikewarrior350]

well i got the carb for free and my plan was to put it up on ebay but figured i would see if it would be worth the upgrade or not before i did