Edelbroch carb

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

atv

Well-Known Member
Joined
Mar 16, 2006
Messages
993
Reaction score
0
Location
Oxford, Pa
Were do i get this edelbroch carb? and how much and will it fit an '05 raptor 350?
 
You can get them lots of places I'm not sure which websites have them for cheap, I bought mine on ebay. The prices are usually $370 and up. One for a warrior won't work on the rappy, but edelbrock makes one specifically for the raptor 350, they just might be a little harder to find since the rappy hasn't been out long.
 
well i checked ebay for a raptor one and couldnt find one so any other places?
 
ahh **** atvparts doesnt have one for a raptor350 and im lookin on the site of rocky mountain and cant even find carbs for sale in that ima check the book now...
 
heres th difference on the both nothing relly i was told the warrior one will bolt right up to the rappy

1987-04 WARRIOR
The Warrior kit works best with performance exhaust and open air box. Kit includes new manifold that moves carb closer to motor for increased horsepower without sacrificing low end torque.
Bore: 32x36mm oval
Thumb Kit #3011
Twist Kit #3150


2005-2006 RAPTOR 350 (w thumb throttle)
Designed to work on a stock or slightly modified Yamaha Raptor 350, this Edelbrock Performer Series carburetor increases horsepower and torque without sacrificing ride-ability. Available with thumb or twist throttle operation.
Bore: 32x36mm
Thumb Kit #3108
Twist Kit #3109
 
Other than because of the different part numbers, I assumed they were different because the raptor has a different intake manifold and intake boot. Maybe the only difference is the length of the throttle cable or something like that, but I think the spacing between the head and airbox tube is different because from the factory the raptor's carb is closer to the head.
 
well i dunno... theres the one on ducan racing but its like 420$ but i think im just gonna go but filter and pip and jet kit before i do that...
 
Back
Top