Electrical Safety wire

[warriorrider13]

Does anyone know if am able to remove that top wire that is attached to the clutch without it changing anything?

 

[yamarider]

I'm not sure if you're talking about the one for the clutch or the one for the parking brake. I thought you already removed the one for the brake though, so i'll assume you mean the clutch sensor. You can unplug it, and all you have to do is plug the harness back into itself to bypass the switch. That sensor uses spade connectors, so it's simple to do.

 

[warriorrider13]

well I mean disconnecting both wires and remove them all together, if that will change anything?

 

[yamarider]

I have an aftermarket clutch perch on my warrior so I don't have either of those sensors anymore. The only thing that changes is you have to remember to pull in the clutch before you start in gear.

 

[warriorrider13]

I see! Cool, so I can remove those things. The reson I want to remove them is becuase where the plastic is(at the end of the wire on the clutch and parking brake), its cracked and broken. So sometimes its loose and doesnt start.