fmfwarrior21
Well-Known Member
Sup boys Doug convinced me that im Elite material so here goes.
Oh yeah ill take a bunch of pics tommorow once I clean my bike up.
Mods:
Wiseco 10:25
Cleaned up cast marks in the ports
Pro-Design Tether
Powermadd Handguards
Blingstar Bumper
AC Nerfs
AC grabbar
Attack Racing graphics (I represent mofucka's) ;D
EBC Dirtracer Clutch
Kenda Klaw MX's
Douglas .160's up front
ASR +2's
Works Pro-Series Piggybacks with pgybks. w/ rideheight and compression adj.
Durablue Eliminator Axle
Twin-Air Proflow kit
SRP CDI
Hotshots Ignition coil
RK Chain
JT Sprockets
LSR Blockoff Plate
Moose KX Bend bars
Moto-Cell Battery
Airbox eliminated
Polished brake an throttle cap
Polished Yamaha Clutch cover but just the circular part
Custom Light Cover gap
Custom airscoops well I did have them but I got pissed an ripped them off with a hammer at a race :-[
Setup (My racing setup)
Rear shocks 4 clicks out from fully damped
Front shocks 15 threads down on the preload an 4 clicks out from full soft
15-40 gearing
10psi rear tires 8 psi front tires
front tires toed in 1/8"
Future mods...well hmm
Rear shocks w/ compression adj.
Razr MX's all around
Twin steering dampers
.390 camshaft
velocity port an polish and 3 angle valve job
Anti-Vibe stem and that would prolly do it I imagine racing aint cheap. ;D
Oh yeah ill take a bunch of pics tommorow once I clean my bike up.
Mods:
Wiseco 10:25
Cleaned up cast marks in the ports
Pro-Design Tether
Powermadd Handguards
Blingstar Bumper
AC Nerfs
AC grabbar
Attack Racing graphics (I represent mofucka's) ;D
EBC Dirtracer Clutch
Kenda Klaw MX's
Douglas .160's up front
ASR +2's
Works Pro-Series Piggybacks with pgybks. w/ rideheight and compression adj.
Durablue Eliminator Axle
Twin-Air Proflow kit
SRP CDI
Hotshots Ignition coil
RK Chain
JT Sprockets
LSR Blockoff Plate
Moose KX Bend bars
Moto-Cell Battery
Airbox eliminated
Polished brake an throttle cap
Polished Yamaha Clutch cover but just the circular part
Custom Light Cover gap
Custom airscoops well I did have them but I got pissed an ripped them off with a hammer at a race :-[
Setup (My racing setup)
Rear shocks 4 clicks out from fully damped
Front shocks 15 threads down on the preload an 4 clicks out from full soft
15-40 gearing
10psi rear tires 8 psi front tires
front tires toed in 1/8"
Future mods...well hmm
Rear shocks w/ compression adj.
Razr MX's all around
Twin steering dampers
.390 camshaft
velocity port an polish and 3 angle valve job
Anti-Vibe stem and that would prolly do it I imagine racing aint cheap. ;D