Gear and one way bearing stuck together

[Warriorfreak99]

My starter clutch was grabbing and stalling the starter and engine while i was trying to start it so i took it apart and the gear that goes behind the flywheel is stuck in the starter clutch, anybody know how to safely unstick the two?

 

[YAMAHAULER]

spray it down with PB blaster let soak and then just keep trying to free it and it should eventually come apart
I had to lightly pry between the flywheel and starter clutch on one from a 92 and it slowly came apart

 

[Tom-UK]

Get a piece of ally tube against the teeth and give it a tap in the right direction with a small ish hammer to unstick it (make sure you use ally or you'll trash the teeth. Mine did this when I took the bike apart and cleaned it, didn't re oil it so it was stuck when I put the engine back together

 

[Warriorfreak99]

i got it...thanks guys