duneracerweston
Well-Known Member
well i dont!! they are stupid pains in my a$$ got one setting in the shop now guy brought up saying "it wont run the gas tank is bad and the carb is gummed up." boy he wasn't kidding the tank is so rusted it leaked when i pulled it off, the carb was like poring rust out the relay that sends power to the fuel pump shorted because the fuel pump was pulling to much power because it was pulling all the rust from the tank. so naturally those had to be changed no biggy right? so the guy said can you have a aluminum tank made? ya that wasn't hard to do. so heres were the stupidity really chaps my butt the filler neck for the tank is right in front of the right rear tire so it always fills up with water so the tanks are always rusting thats just a mule thing. but heres the kicker i had it all together rolled it over wont start. cheaked spark thats fine sand blasted the plugs put them back together still wont run su i looked up the valve specs and pulled the valve covers of and i find both #1 and#2 cylinder's intake valves bent at 40 degree angles at the bottom so shoot got to change those too checked and both of the caps were still in place on the cam [thank God] so i called the local kawi dealer they didnt have em so i asked what could cause it because ive never seen one do that turns out both intake valves are seized so both heads got to come off and be taken to the dealer to be redone because its a normal thing. WTF? thats normal? yall are out of there freaking minds but thats a mule for ya...
thats all for now just needed to vent...
thats all for now just needed to vent...
