Help wiring problem

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jantheman9494

Member
Joined
Mar 31, 2014
Messages
17
Reaction score
0
I went to start my warrior and turn the key on N light came on battery good but no crank,turn or nothing. even the head light not even turning wend i put the switch on anybody else had this problem. Pls help
 
I went to start my warrior and turn the key on N light came on battery good but no crank,turn or nothing. even the head light not even turning wend i put the switch on anybody else had this problem. Pls help

Is the KILL switch in the run or off position?
 
Noo even if i had it it still turn over but it wont start of corse it just doest do anything.
 
a9ugy4yv.jpg
 
i had the same problem with my brothers warrior there is 2 relays next to the solenoild its the grey plug on plug that and make a jumper wire looking at the plug with the click facing up jump the 2 holes on the rite top n bottom i would try that.
 
Back
Top