jet kit

[tmaxxman]

what is a good jet kit to go with ???

 

[88WarriorBoy]

Go to JetsRus and buy your jets individually

 

[tmaxxman]

Go to JetsRus and buy your jets individually

thanks i was wonding if i could get them individually :tup:

 

[Mathius]

Yah man..
I buy my jets individually for each of my machines (pilot, and main), and make my own kits.. You can buy those little bead holders at walmart for a $buck. Then a couple of proper sized screw drivers, and some tread sealant.
Voila!! Jet kit.. :tup:

 

[tmaxxman]

now i got another ??? my main jet is 150 and the pilot is 42.5 what size would i need my warrior has a full exhaust and port and polish

 

[88WarriorBoy]

Buy the next 2 size pilot jets up and buy the next 4-5 main jets up

 

[Mathius]

Whats your altitude? I'm at 3300ft, and rode around 4000 to 5000 a lot. My motor was a 366 with a FMF powerbomb header, and powercore4 muffler.
I found it liked the 147.5 main, and 45 pilot the best.

It would kinda blow a little black off idle, but the leaner main was the way to go.

 

[beastlywarrior228]

i ran 150 main and 45 pilot with exhaust and no lid

 

[Mathius]

i ran 150 main and 45 pilot with exhaust and no lid

Yah but your at a lower altitude right? I would say that if you lower than 3000ft the 150 main is perfect. If your higher than that, then the 147.5 is the way to go.

 

[Gen1Pat]

I'm at 385' and am running a 52 pilot and 155 main with the needle in the 2nd notch. That's with weston's air box and a slip on that has a HUGE mid pipe.

 

[Mathius]

I'm at 385' and am running a 52 pilot and 155 main with the needle in the 2nd notch. That's with weston's air box and a slip on that has a HUGE mid pipe.

**** man.. Thats a fat pilot jet!
She doesn't blow black smoke come'n off the line?

 

[Gen1Pat]

Nope. Not at all.

 

[geeessfore]

Ive messed with mine for awhile now and I cant get it to run correct without stock pilot and I have a nice bit of mods under my belt.

 

[tmaxxman]

ok i all so have a hi flow k&n air fliter on the bike to . what would i need if i get a stage 1 hotcam put in it to i plan on getting one this winter

 

[Mathius]

ok i all so have a hi flow k&n air fliter on the bike to . what would i need if i get a stage 1 hotcam put in it to i plan on getting one this winter

Well where do you live man? Whats your altitude???
Thats the defining difference in what jetting you would need to maximize your performance..
Without knowing the altitude your at, you'll end up with 10 different answers again.

 

[88WarriorBoy]

lol true dat mathius

 

[tmaxxman]

Well where do you live man? Whats your???
Thats the defining difference in what jetting you would need to maximize your performance..
Without knowing the altitude your at, you'll end up with 10 different answers again.

i live in central pa. don't know my altitude

 

[Mathius]

i live in central pa. don't know my altitude

Ok.. So I did a google search, and Bellefonte, PA (Which was about dead center on the map) Is around 900'ft.
So you could jet fatter. The 150 main, and 45 pilot would probably work good for you.

 

[tmaxxman]

Ok.. So I did a google search, and Bellefonte, PA (Which was about dead center on the map) Is around 900'ft.
So you could jet fatter. The 150 main, and 45 pilot would probably work good for you.

ok thanks im only about 50 mile from there