Motor turning over, but no spark?

[Warrior Mike97]

I have never had an issue with my Warrior till I stored it for a few years. I cleaned up the carb. and put in a fresh battery and new plug. I went to start it and it turns the motor over just fine, but the quad fails to start. I pulled the plug and ground it to the cylinder head and turned the engine over. Still no visible spark-not even a weak one. I don't know where/what to check. I have a voltmeter I can use for checks. Maybe someone could tell the specs and what to look for? Please help.:???:

 

[savage24x]

Check the sticky. http://www.yfm350.com/forums/showthread.php?t=27879

 

[Warrior Mike97]

Thank You

I just wanted to say thanks for all the help in diagnosing my problem. It took a while, but my investigating found a bad stator on the pulse coil side. Now things are good again. Anyone have any good plastic restoration ideas? Mine are sun bleached really bad and new fenders are expensive. Thanks:atv::thanks:

 

[alex456123]

Propane torch over them lightly will bring them back. Just be careful not to burn them

 

[lbjamm]

What?