Need a big bore kit with a good price.

[wvwarrior]

I am wondering if anyone could recommend a good big bore kit for a price tag of about 500 to 600 dollars. i have been looking at the athena big bore kit 84mm 396cc with the +4 mm hot rods crank. that would cost me about $521 and some change. But if anyone else has any better deals please let me know. i want to really bring some life into this warrior. And i am not affraid to spend a little money to do so. :laughup:

 

[1998yamahawarrior]

The +4 is actually 379cc, for the 396 you need the +7. You could just go the 366cc which is 85mm piston, then get kibblewhite springs and a good aftermarket cam from webcam, poweroll, or megacycle. theres a few that have setups like this and Im sure they will be putting there 2cents in later, as they have first hand knowledge of that biuld.

 

[bikewarrior350]

if you up the compression and put in a JE 366 with a .390 cam and a good exhaust and you'll run circles around any other warrior. mine will actually keep up with my 700 pretty deicently in the woods. personally while strokers are sweet, i dont know that id want to put one in an aircooled motor on a trail bike because it would run really hot. but thats my 2 cents. whatever you do you should definately put an oil cooler on there.

 

[duneracerweston]

You are going to want to run a oil cooler regardless of what you do i m not forsure about the warrior but on som bikes when they get stroked it throws the counter bancer off a tad so they tend to grenade the bottom end