NEED HELP GUYS, 91 Warrior!

[sea157]

Need help with recently purchased 91 Warrior.

Every time I shift it into reverse it kills the motor.
Not being stalled out with the clutch, it just stops.

I cannot start it in reverse at all even with the clutch pulled in.
With the clutch pulled in it will start in any gear as long as the reverse/forward shifter is in the forward position.

Any ideas?

Thanks Steve

 

[fknboss]

Adjust your clutch. Mine was doing the same thing.

 

[sea157]

No it is not the clutch, it was not stalling out it would just shut the motor off.

Turns out the reverse sensor was missing its ground wire.
I put a ground wire on the sensor and bingo no more problems! :tup:

 

[Warriorfreak99]

howd you do that? Lol mines doin it too

 

[sea157]

howd you do that? Lol mines doin it too

Just splice into the wire coming out of your forward/reverse shifter and run it to a ground somewhere.

I lifted my air box off and ground the paint off of the one air box mounting areas put a "O" ring wire connector on the wire and put the bolt through the air box then the "O" ring wire connector and remounted the air box.

If you want to see a picture just let me know.