Need major help with changing my stator barrings

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

[email protected]

New Member
Joined
Apr 9, 2013
Messages
1
Reaction score
0
Location
btown
SO ITS A 93 WARRIOR it has those hex heads on it can get those off either.then i have replaced almost everything else on it in cludeing the clutch top end kit sleved jettedlots of things the previous owner had done but ran fine after a day of riding let it cool about 6 hours then sprayed water on it to clean it and battery was dead then it sounded like just the starter was only spinning hasnt ran since so i need help with this final partand hopefully it will do it would greatly thnak you for any suggestions, im almost crazy over the amount of money i have put in this several people have said that this is the issue i just dont ever have luck with this stuff thans again
 
Your Starter bearing? You mean the one-way bearing on the flywheel right?
 
Back
Top