need pull start for warrior and need oil cooler setup from 95 big bear 350

[silver bullet]

hello. new here, im looking for both pieces to make my 94 warrior have pull start. also i would like to add a oil cooler and i heard i can use the parts from a 95 big bear? all i really need from the big bear is the cap and parts inside on the filter. i can buy the rest from autozone.

 

[tyler]

You realize you will have to have the head off an older warrior right?

 

[silver bullet]

You realize you will have to have the head off an older warrior right?

why would i need the head from a older warrior?

 

[baddawg]

For the decompression switch.

 

[tyler]

For the decompression switch.

Exactly without it you would have to be superman to pull it.

 

[silver bullet]

Exactly without it you would have to be superman to pull it.

ok so i did a bunch of research and i have also personally tested and if i wanted the compression relief then yes i would have to get a older head. but there are several people who have done this including my neighbor that i just found out about yesterday. he has not done the head change and i can pull start his first pull every time and its not that hard and his motor was just rebuilt?? now if your a little guy then ya u might have trouble but i couldnt imagine?? just wanted to get that straight. so does anyone have any parts? Thanks

 

[silver bullet]

ok so i did a bunch of research and i have also personally tested and if i wanted the compression relief then yes i would have to get a older head. but there are several people who have done this including my neighbor that i just found out about yesterday. he has not done the head change and i can pull start his first pull every time and its not that hard and his motor was just rebuilt?? now if your a little guy then ya u might have trouble but i couldnt imagine?? just wanted to get that straight. so does anyone have any parts? Thanks

???

 

[bomber315]

you live by superman?!?!?! hahaha

maybe with the stock piston you can manage to pull it over, but its a major major pain with any higher compression piston... and eventually your going to break the rope

 

[elwood]

you can most likely find a 87 head off of ebay for a alright price, A pull start would be nice as a backup.