No reverse!!!!

[atl3128 Wolverine]

I have a 2004 wolverine 350 and I cannot get it to go into reverse for anything. My rear brake caliper and master cylinder need replacing could that have anything to do with it?

 

[95Wolverine]

First off, make sure the actuator cable on the right side (as you sit on the machine) down by your ankle is actually pulling the arm to the back of the machine when you turn the reverse lockout knob.

If it's not, you've likely found the problem - maybe a disconnected cable or a missing arm. It's also possible the bolt is loose and the arm has come off of the shaft. It can only gon on one way due to it being keyed.