No spark

[1bad87]

Okay I need advice...I have replaced everything there is to replace on my 87 electrically. Still no spark? I have replaced stater, cdi, starter relay, ignition coil, kill switch, starter solenoid, rectifier, new ignition. Could my problem be as simple as a ground? Im literally at a stand still with this quad and am fixing to part it out and buy another. I have been chasing my ass on this quad for a yr lol also I ordered a stator and got sent and 89 had it in and realized it was wrong the company would not refund me instead told me how to wire it up I did so. Could this be the issue? also all lights work including neutral. Does not have parking brake on my quad either. Please help thanks

 

[Warriorfreak99]

it can be as simple as the kill switch is in the wrong position, check your grounds also

 

[1bad87]

Kill switch is in the right position, thanks for the help I'm goimg to clean them all an see if that's it

 

[1998yamahawarrior]

check grounds, frayed wires etc. Really go over it. Also who's stator is it? You may want to ohm it out, just to be sure its not a bad out of the box one.

 

[1bad87]

It's from Ricks stators. I can also check voltage on it as I'm cranking it right?

 

[1998yamahawarrior]

Best to ohm the stator source and pickup coils.