Oil cooler fan ?

[bronc3buster842001]

What temp would be idea for the fan to come on at. i was thinking somewhere around 210 or so..

 

[croc4]

210 sounds reasonable, but why not leave it running all the time?
Thats what I am doing, I have a fan with three speeds, currently I run it on high all the time, its only a 70cfm fan so its not a large air mover, but it seems to make a good difference, and the engine still warms up fine, maybe a little slower than stock.

croc4

 

[1statv]

@croc4 any pictures of your set-up??

 

[warriorgirl09]

i posted the setup i'd use in the dual oil cooler thread i think

 

[duneracerweston]

Depends on wether the sensor is in the oil line or on the cooling fins.

Ive done a couple fan kits and normally do it on a toggle, although180-210 is as hot as I would go for the sending unit.

Your gonna want it as a puller fan because it has a better tendency to pull the heat out

 

[bronc3buster842001]

I was thinking about mounting the sensor on the head since thats what gets the hottest.

 

[duneracerweston]

Then get a 210 because those fins will be hotter then the oil and you dont oil to be to cold

 

[bronc3buster842001]

Now its just a matter of figureing out how to mount the sensor.