? on the UNI filter set up

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

YAMAHAULER

Well-Known Member
Joined
Nov 30, 2011
Messages
7,089
Reaction score
17
Location
Wisconsin
I was wondering if a UNI filter will let my 02 breath better and lean it out a little?
I am running a 155 main, open lid on airbox, stock filter, sparky's Torq head pipe and HMF performance muffler and she is still a little rich and if I hit the throttle too fast she bogs but mostly when first started till at running temp after she's warmed up throttle response is right there
do I go UNI or do I drop the main down to 152.5?
 
the uni will lean it up a bit i think and put you close to where it needs to be. i got a prodesign billet adapter with a uni from xc bob's on ebay. good setup if you don't wanna run a cfm type box.
 
the uni will lean it up a bit i think and put you close to where it needs to be. i got a prodesign billet adapter with a uni from xc bob's on ebay. good setup if you don't wanna run a cfm type box.

can you find me the link?
 
A $100 really!!! they don't have them any cheaper? I can get a full cold air intake for a car for half that!
 
i would switch to uni and take the box out if you got 1 that's what i got on my 98 warrior but i also have a keihin pe 38
 
would a drop in help just as much as the one with the adapter?
keep in mind my air box lid has a 4" x 4" square opening cut out of the middle so the lid will still hold the filter in place
 
this is my air box lid

2012-06-02005029.jpg
 
Back
Top