Pistons

[yammy350rider]

I am checking interest in a couple of pistons I have.
I have a .20 Wiseco 10.25:1 and pin for $50+shipping
I have stock piston and pin for $25+ shipping

Anyone interested in either one lemme know, Thanks.

 

[warriorspeed350]

is the weisco any better than stock? is it the one that adds like 3hp?

 

[DeathShadow]

is the weisco any better than stock? is it the one that adds like 3hp?

All pistons unless you go a huge jump in bore size arent going to gain you terribly to much more going + 10 or 20ccs.

 

[warriorspeed350]

will this be worth the 50$for the power

and what will a hot cams do for me im thinkin of gettin 1

 

[89warrior]

Will you be interested in selling the wrest pin only for the wiseco piston?

 

[yammy350rider]

How much will you give me for it?

 

[DeathShadow]

Will you be interested in selling the wrest pin only for the wiseco piston?

You know you can buy new wrist pins and such...?

 

[DeathShadow]

will this be worth the 50$for the power

and what will a hot cams do for me im thinkin of gettin 1

Hotcams are ******* garbage do not waste your money on one; however a piston should be coupled with a cam to help return some bottom end power.

 

[yammy350rider]

$10 and the pin is yours

I only have the stock piston and pin left. Anyone want that one?

 

[warriorspeed350]

im too confused screw the hotcams and piston

im in over my head

 

[evilhaze]

the Hotcam will be great if you buy new heavy duty springs with it, all cams are ground the same way and to the same specs,

 

[DeathShadow]

the Hotcam will be great if you buy new heavy duty springs with it, all cams are ground the same way and to the same specs,

No... I have seen many abortions and HUGE mistakes come from hotcams in our shop that they will not stand behind. Then furthermore the duration/lift on a hotcam is not as good as other companies; if your going to invest money into springs why the **** would you want to buy a hotcam when you can get a better lift/duration combo?

Hotcams must do like NO R&D because when they figure out from shops and customers that their cams are grenading inside cylinder heads that model just magically disappear from the market with out a peep... We have had Wiseco R1 bore kits do the SAME ******* thing; except they admitted it was their fault and took full responsibility/liability.

 

[2xtreme]

Hotcams must do like NO R&D because when they figure out from shops and customers that their cams are grenading inside cylinder heads that model just magically disappear from the market with out a peep... .

That is their R&D program.

 

[2xtreme]

.. all cams are ground the same way and to the same specs,

This is not entirely true. If that were the case, all that would be available is stock replacements.

 

[flyinacez]

If you get a bigger piston and bore do you need to do anything else? Surely rejet.
Thanks

 

[DeathShadow]

If you get a bigger piston and bore do you need to do anything else? Surely rejet.
Thanks

If you go with a large bore you may want to consider an oil cooler for hard summer riding; other then that just a re-jet. I personally dont see the point of going up a bore size just for the minimal HP gain - do it when you need a rebuild, if your installing a cam, or if your going to re-sleeve and jump more then 30ccs (like from 348cc (stock) to 385cc or 400).

 

[yammy350rider]

If there are scratches on your cylinder wall you should bore it out to clean it up(i dont know if thats what you consider a rebuild) but i know a guy that will just run it till it died and then replace a cylinder when he could have just bored it out and saved a bunch of money.

 

[DeathShadow]

If there are scratches on your cylinder wall you should bore it out to clean it up(i dont know if thats what you consider a rebuild) but i know a guy that will just run it till it died and then replace a cylinder when he could have just bored it out and saved a bunch of money.

The question was regarding an overbore... thus the only scratches would be from the conditioned sleeve/hone.

 

[yammy350rider]

i missunderstood

 

[warriorkid]

How much was your big bore kit Death?