Powerbomb header

[sparkymichigan]

OK,
So I had this idea and I think I found the parts to weld up a homemade powerbomb for about $12.
If someone out there who has one would be so kind to give me some measurements of the chamber and the location of it I think I can make one.
I picked up the parts just need to know if they are the right size. Then I can fill everyone in on the info.
I need the OD and the length of the expanded chamber.
Please help this could save us all some $$$$$

 

[Gen1Pat]

I wanna say it is 2" or 2 1/8" od. The stock pipe is a HAIR larger then 1.5. You may have to get what you are buying swelled that hair larger to fit over the stock pipe. It isn't hard to make. I've made a custom warrior header before, and about to make another. From scratch.

 

[sparkymichigan]

How long is the chamber, or does it matter, or the longer the better?

 

[Gen1Pat]

Don't know. I'd guess it to be 5-7in. Don't know what the bennies would be by making it longer or shorter. But, you don't have a whole lot of room to play with. Both, in length and cylinder clearence.

 

[sparkymichigan]

Thanks for the help Pat. I think I'll give it a try I don'thave much to lose.
I f anyone can give me the length measurement it would be great.