problem

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikey

Member
Joined
Mar 30, 2006
Messages
21
Reaction score
0
i just got my raptor 350 back today from the shop, they put a gytr air filter, and a web camshaft .430 with the spring kit. they didnt put the bottom spring seat, they said it dont need it? the problem is it makes a ticking noise at low rpms. and when u first take off fast it dont wanna go, then it takes off. what could be wrong? thanks for your help
 
ughh....spring like the seat u sit on? lmfao i needa lil more info...
 
they keep the bottom valve spring seat in. and didnt put the spring seat that came with the spring kit.
 
well id say just take it back and tell them you want it on there... u didnt come there for their advise... you came there to get the parts put in
 
yeah ur right i should take it back. i was just kinda wondering what it could be.
 
well if you take it back and they put it on... and it still doesnt you might need to provide a little more info...
 
The ticking might be normal, the valves are opening more so they're going to make more noise. Your slow takeoff may be a jetting issue, did you or the shop rejet it after the mods?
 
The ticking might be normal, the valves are opening more so they're going to make more noise. Your slow takeoff may be a jetting issue, did you or the shop rejet it after the mods?

lmfao i was gonna say did u jet it or did the shop jet it... i didnt want to sound like a *** so i didnt... lol
 
no i didnt rejet it. i dont think the shop did either. this is my first quad so i dont know much.
 
They should have rejetted it. Those mods allow more air into the engine. You need to maintain a specific air-fuel ratio, so the carburetor needs rejetted to allow more fuel into the mix.
 
well i am going to take it back. i took the air filter off and it still does it.
 
Back
Top