Raptor 350 Motor swap!

[Lobbracing]

My wife's case on her 2007 Raptor 350 cracked, lost oil, and killed the motor. To have it rebuilt at the shop with all new parts and all was like $2000. I found a complete 2004 Raptor 350 motor to replace it with that make its a cheaper fix. I know the case is the same and will line up to the motor mounts, but my question and concern is.. will the electrical, carb & intake, exhaust all match up? Has anyone dealt with something like this or switched out a lot of parts from a older raptor to a newer one? The guys at the shop said it should from what they can tell but I wanted to get some more information. Thanks for the help.

 

[alex456123]

2004-2007 were the same and should just be plug and play!

 

[lbjamm]

I'm not sure on the electrical, but everything else is a direct swap. Might have to swap your stator, but I doubt it.

 

[bones]

should be direct swap and if not all you need to do is pull the stator cover off your 07 motor and put it on the 04 motor.. its like 9 bolts .... and they get torqued to 7.2 lbs

 

[bones]

oh an 4 in the plastic cover and 1 in the end of the crank

 

[alex456123]

Nope the stator is the same throughout all rappy 350 years.