My warrior was stolen about 7 months ago ..and i just recently found out where it was and retrieved it.. well when i got it back it had been taken apart and im not sure if there is something missing or not.. but for some reason the rear caliper does not want to line up with the disk the way we are putting it together.. its got a rad warrior carrier on it.. i was wondering if someone might be able to take some close up pics of there rear caliper, Carrier , and disk so i can see how its saposed to go .. i dont think were missing anything.. but i could be wrong.
rear brake part missing ?
- Thread starter motion
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
schppppeeiiddiiiee
Well-Known Member
- Joined
- Apr 22, 2006
- Messages
- 518
- Reaction score
- 0
caliper may be frozen or your pads aren't pushed back far enough
I don't think you really could be missing anything without it being totally obvious. There's nothing that goes between the caliper and the carrier, so unless you have the caliper bracket to the left of the carrier bracket instead of to the right (might not even be possible) it's probably because the slider is seized or isn't in the right position. The bracket on the caliper should slide in and out about half an inch, if it doesn't move then that's probably your problem.
ill take a pic after christmas and show you what is going on .. it may be a combination or all of what you folks said.. wont be working on it again for a few days .. but wehn i do i will post pics.. thanks for your help.. Hope you all have a merry christmas
DeadLastRacing
Well-Known Member
Did you have to steal it back?
97warriorrider
Well-Known Member
The rad carrier placed the actual mount for the caliper to the left farther than stock..so it comes with 2 longer bolts and 2 spacers..Are you missing the spacers?
