yeoldetymewarrior8
Well-Known Member
I'm trying to gain funds so that i can get my car finished for when I go to school in less than a month! I need to sell everything i can get!
Everyone on here knows my warrior and the story behind it pretty much...
But now I have to sell it because I am broke! I have tons of extra **** and only the best stuff was used to build my quad.
What It does not have:
Carburetor or intake boot
Air box
Front Shocks
Headpipe
Front tires and rims.
List of everything I can think of right now
JE 10.75:1 piston with NEW rings!
hotcams stg 1
New DID cam chain
P&P by hammer racing
Cut yoshimura exhaust
Renthal Sprockets
PC'd frame, candy blue
Magnum +2 Pc'd lower a-arms candy blue Chromed upper a-arms
Durablue 2+2 eliminator axle
Douglas .190's w/ 20-11-9 razr's
New harness as of may 06
High perf coil
Maier plastics all around front fenders trimmed
IMS Roll design +1 Steering Stem
IMS Roll Design Footpegs
Pro Taper contour bars Henry/Reed Bend
Spider Grips
MSR clutch and brake levers
Terry Cable Billet Aluminum throttle
NOS Machine Case Saver
Front Galfer SS Braided brake lines
Custom Banshee Direct shifter for big bear oil cooler setup
Tusk Gas Cap
99% of the bolts on the whole quad are polished stainless steel ($80 kit)
New handlebar electronics as of may 06
Pro Design tether cable, brand new
Custom LED underglow lights w/ custom switch next to reverse lever
All electonics less cdi, and rectifier were purchased new as of may
New starter & solenoid as of may 06
Cometic Head Gasket
'01 Raptor 660 Rear Shock
That is all i can think of on the quad
Extra's:
GYTR Stator cover
Powermadds
Complete Yamaha Seat
Complete Factory FX gripper seat
Full Extra set of plastics (blue/black)
Stock steering stem
Renthal 7/8 Handlebars
Extra sprocket (13t renthal)
AC nerf bars
98% of the stock Bolts
Some extra stainless bolts
Extra hacked (but working) wiring harness
Stock Bumper
88 headlights
Clutch perch
fuse holder
other random things
This quad WILL start up and run if you put a carb on it. After I put the new rings in, it burned oil still, I think one of 2 things could have happened: The oil ring latched onto itself and wont expand, or the valve seals are bad.
Everything I have goes with this quad, Everyone on here knows how nice it once was, and now it just sits and it depresses me. I'd rather see someone clean it up and give it the time it deserves to make it beautiful again. I built this quad exactly to a vision I had for it and no detail was spared. I put over $3000 dollars in just parts for the quad and it was a 9 month build. Thats not even counting the cost of the quad itself with the parts that were already on it. I have over $6000 in receipts!!
more pics of what it was:
http://s33.photobucket.com/albums/d58/warriorrider88/warrior/
Price is $1,700 I'm pretty firm, but money talks, and i need it. bad.
Now, onto my bike
It is a 2004 Eastern Jane
Frame:Eastern Jane
Crank: Eastern
Pedals: Eastern
Chain Wheel: Eastern
Chain: Fairly new
Forks: Eastern
Bars: GT
Stem: S&M Redneck
Headset: Eastern
Front Wheel: Eastern
Front Tire: Kenda Dirt
Rear Wheel: Eastern
Rear Tire: Maxis M-Tread
Brakes: Diatech, new tektro pads, new cable, Diatech Dirt Harry Lever
Seat/Post: Eastern/Cut Post
I'm asking $200 for the bike. Reasonable offers will be considered
I will most likely not take any trades because I need cash! Unless you are trading me parts from a supra.
Please feel free to call me with any questions
609-280-3259.
Everyone on here knows my warrior and the story behind it pretty much...
But now I have to sell it because I am broke! I have tons of extra **** and only the best stuff was used to build my quad.
What It does not have:
Carburetor or intake boot
Air box
Front Shocks
Headpipe
Front tires and rims.
List of everything I can think of right now
JE 10.75:1 piston with NEW rings!
hotcams stg 1
New DID cam chain
P&P by hammer racing
Cut yoshimura exhaust
Renthal Sprockets
PC'd frame, candy blue
Magnum +2 Pc'd lower a-arms candy blue Chromed upper a-arms
Durablue 2+2 eliminator axle
Douglas .190's w/ 20-11-9 razr's
New harness as of may 06
High perf coil
Maier plastics all around front fenders trimmed
IMS Roll design +1 Steering Stem
IMS Roll Design Footpegs
Pro Taper contour bars Henry/Reed Bend
Spider Grips
MSR clutch and brake levers
Terry Cable Billet Aluminum throttle
NOS Machine Case Saver
Front Galfer SS Braided brake lines
Custom Banshee Direct shifter for big bear oil cooler setup
Tusk Gas Cap
99% of the bolts on the whole quad are polished stainless steel ($80 kit)
New handlebar electronics as of may 06
Pro Design tether cable, brand new
Custom LED underglow lights w/ custom switch next to reverse lever
All electonics less cdi, and rectifier were purchased new as of may
New starter & solenoid as of may 06
Cometic Head Gasket
'01 Raptor 660 Rear Shock
That is all i can think of on the quad
Extra's:
GYTR Stator cover
Powermadds
Complete Yamaha Seat
Complete Factory FX gripper seat
Full Extra set of plastics (blue/black)
Stock steering stem
Renthal 7/8 Handlebars
Extra sprocket (13t renthal)
AC nerf bars
98% of the stock Bolts
Some extra stainless bolts
Extra hacked (but working) wiring harness
Stock Bumper
88 headlights
Clutch perch
fuse holder
other random things
This quad WILL start up and run if you put a carb on it. After I put the new rings in, it burned oil still, I think one of 2 things could have happened: The oil ring latched onto itself and wont expand, or the valve seals are bad.
Everything I have goes with this quad, Everyone on here knows how nice it once was, and now it just sits and it depresses me. I'd rather see someone clean it up and give it the time it deserves to make it beautiful again. I built this quad exactly to a vision I had for it and no detail was spared. I put over $3000 dollars in just parts for the quad and it was a 9 month build. Thats not even counting the cost of the quad itself with the parts that were already on it. I have over $6000 in receipts!!
more pics of what it was:
http://s33.photobucket.com/albums/d58/warriorrider88/warrior/
Price is $1,700 I'm pretty firm, but money talks, and i need it. bad.
Now, onto my bike
It is a 2004 Eastern Jane
Frame:Eastern Jane
Crank: Eastern
Pedals: Eastern
Chain Wheel: Eastern
Chain: Fairly new
Forks: Eastern
Bars: GT
Stem: S&M Redneck
Headset: Eastern
Front Wheel: Eastern
Front Tire: Kenda Dirt
Rear Wheel: Eastern
Rear Tire: Maxis M-Tread
Brakes: Diatech, new tektro pads, new cable, Diatech Dirt Harry Lever
Seat/Post: Eastern/Cut Post
I'm asking $200 for the bike. Reasonable offers will be considered
I will most likely not take any trades because I need cash! Unless you are trading me parts from a supra.
Please feel free to call me with any questions
609-280-3259.