stage 1,2, or 3 cam?

[Warriorfreak99]

Bored my warrior over to a 357 wiseco 10.25:1, now looking at a cam. which stage should i get? If it helps, i have a white bros mx4 slip on, k&n air filter, rejetted(not sure how much)

 

[duneracerweston]

Web 440-390 here best cam ever for my style

 

[Warriorfreak99]

any head work required?

 

[alex456123]

Yup springs and a Port and polish to get good flow outta it.
Hcs1 is a good cam hcs2 has too long of a duration

 

[mvvette97]

I have a stage 2 hotcam for sale but like alex said it is a long duration cam. It did give mine a harder pull from mid to top but did lose some bottom end. I do alot of low rpm riding so I went back to the stage 1 cam.

 

['00 WO-YA!]

Good port work will help any Cam show it's full potential even the HOTCAMS. I've ran a S1HC and for me it was just ok. The ramps just can't be that aggressive to get by on stock springs.

 

[Warriorfreak99]

how does the stage 3 hot cam compare?

 

[alex456123]

It doesn't exist...

 

[Ranger1997]

how does the stage 3 hot cam compare?

Stage three hot cam does exist. Your motor must be completely ported, polished, correct squish yatta yatta yatta.... For it to even think about working. Dont get it unless u have 10 g's to drop on a warrior:loco:

 

[nukacola]

Stage three hot cam does exist. Your motor must be completely ported, polished, correct squish yatta yatta yatta.... For it to even think about working. Dont get it unless u have 10 g's to drop on a warrior:loco:

At that point get a CanAm 1000 Renegade!!

 

[alex456123]

Stage three hot cam does exist. Your motor must be completely ported, polished, correct squish yatta yatta yatta.... For it to even think about working. Dont get it unless u have 10 g's to drop on a warrior:loco:

No it doesn't.

 

[Warriorfreak99]

i wouldnt give you $2000 for one.

 

[lbjamm]

Stage three hot cam does exist:loco:

Prove it.

 

[bkroll84]

Stage three hot cam does exist. Your motor must be completely ported, polished, correct squish yatta yatta yatta.... For it to even think about working. Dont get it unless u have 10 g's to drop on a warrior:loco:

And you have the only hmf header ever made I appreciate your enthusiasm. Unless you have proof to back up claims I wouldn't state things as facts your new to the warrior most of us have looked into all parts and mods and know a lot about these quads.
icstfu:

 

['00 WO-YA!]

CWR .415, the HOTCAMS just haven't proven themselves to me.