johnsmith133
Well-Known Member
is it hard to take out and change? lmk
steering stem?
- Thread starter johnsmith133
- Start date
Help Support Yamaha Raptor 350 & Warrior Forum:
YAMAHAULER
Well-Known Member
Not at all bolt at bottom and 2 bolts on top. and disconnect tie rods and handlebars and pull it up through
Mathius
Well-Known Member
Just remember not to beat on the end of the tierod.. If you mess the threads up on it, you'll never get it back together. Just a heads up if you didn't already know that?
Screw the nut on half way, then you can give it a couple cracks with a hammer to break the seat.
Screw the nut on half way, then you can give it a couple cracks with a hammer to break the seat.
Gen1Pat
Well-Known Member
Take a ball peen and whack the hole the tie rod shafts goes through. Do that several times and the shock will pop the tie rod right out. I never use pickle forks unless it's an area that you simply cannot get to with a hammer.
