Swing arm bolt?

[1statv]

My nut some how came loose and fell of I noticed the bolt looked stripped so I'm going to replace it. Is there a strongerr bolt I should replace it with or any bolt at the hardware store will work?? Of course same size and length bolt

 

[beastlywarrior228]

If not ive got one

 

[1statv]

@beastly is it in good shape??

 

[1statv]

What size and length is the stock bolt??

 

[alex456123]

you cant replace it with one from the hardware store! the ones that came from the factory are made of tempered spring steel so they wont bend. use a oem spec one.

 

[88WarriorBoy]

you can replace it all the factory bolts are is grade 8 bolts

 

[1statv]

Can or can't anyone else have an opinion on this?? Need some input ASAP

 

[beastlywarrior228]

Yes its in good shape

 

[1statv]

@beastly price shipped to 20744

 

[1statv]

Should I just change the bolt or the whole kit??

 

[beastlywarrior228]

if the bearings still look good and theres no slop then just do the bolt

 

[1statv]

@beatsly so I pulled out the bolt and I was going to order this kit but I don't see we're it would be installed here's a pic
This is we're the bolt came from

This is the kit from eBay

There is no sleeve or any cap ends

 

[bronc3buster842001]

Thats the bolt for the rear bearing carrier. Should be able to just go to the hardware store and find one that fits..

 

[1statv]

Well don't I feel like a a**hole. Sorry guys for the wrong info. I'm still learning

 

[Gen1Pat]

Yamaha dealer may have that part in stock or be able to get it over night. That or go to a machine shop and get a good grade 8 bolt that fits. Or, they should carry metric bolts, get one of those. 8.8 or higher will do.